1. Flush cooling system
2. Refill with “clean water only”
3. Add 1/4 bottle (250ml) of  “Rust Buster / Go Clear”
4. Drive vehicle as normal for one day to a week, longer depending on severity of problem. (The more rust, needs more time to arrest)
5. Flush and replace with clean water and coolant to the recommended concentration percentage as specified in your vehicle handbook
6. Can be mixed with coolant, for best results replace every 20,000Km or 12months.

• Rust Buster / Go Clear also helps the lubrication of water pumps, thermostats and assists protection and preservation of radiator hoses
• Follow directions as shown on the label to achieve maximum satisfactory results
• Can be added to inhibitor or coolant at anytime to boost rust arresting action

• Avoid contact with skin, eyes & clothing -
• Do NOT induce vomiting,  give water or milk to drink - seek medical advice if any ill effects persist.
• If in eyes flush with clean water for 15 minutes, contact with skin & clothing - wash with soap & water.
• Active ingredients are processed micrographites in a propriety solvent solution...

How does it work?
All variations of the formula transmogrify the rust particles (oxidized iron) into an inert substance.
Depending upon the application, temperature, duration and dosage of Rust Buster fluid, the speed at which the iron oxide particles are transmogrified will vary.
Whether hot or cold, rusty system fluid (usually water) over time will become clear as Rust Buster does its magic, transmuting the rust and arresting electrolysis.
For best results the system fluid should be in motion, at the vessel/machine normal operating temperature, to permit the Rust Buster fluid to penetrate all areas.

Flushing your system on a regular basis (at maintenance time) is recommended as you may notice the system's water has turned clear or less opaque and the rust
in suspension is now an inert substance, which can settle as a fine dark sludge. You may also notice that the rust on vessel walls and any immersed objects has 
turned to a dark metallic grey colour, this is normal.

The processed micrographites in the propriety fluid assist lubrication of water pumps and thermostats and is compatible will all coolants.
Adding Rust Buster to an automotive coolant can boost that fluids rust arresting properties.

1. Shake bottle several times.
2. Pour 1/4 bottle (250ml) into the cooling system, usually via radiator cap or the coolant flow through bottle.
3. Run motor for 15 minutes, longer if blockage is obstinate. (30-45 minutes would be the maximum for 250ml - 500ml doses)
4. Drain cooling system when fluid is hot, by removing lower radiator hose. Use CAUTION when doing so to avoid burns.
5. Repeat above if blockage is particularly obstinate, use only 250ml - 500ml at a time.
6. Flush system with clean water. (Use Go Clear / Rust Buster to arrest any cooling system corrosion)
7. Refill your cooling system as per vehicle manufacturer's specified quantity of coolant & water. (usually 50% of each)

• Avoid contact with skin, eyes & clothing -
• Dangerous if swallowed, store securely - do NOT induce vomiting give water to drink - seek immediate medical attention.
• If in eyes flush with clean water for 15 minutes - seek medical attention 
• Contact with skin & clothing - wash with soap & water.
• Active ingredient sodium metasilicate pentahydrate (~ 6%)